Plastisol Techni-Puff Colors

Plastisol Techni-Puff Colors

A 10-15% addition into any 1100 Series colour will create a puff effect. Should puckering occur on jersey material, then it is suggested to use a (110 mesh) to minimize the problem. However, a slight pull or puckering of the material may enhance the puff appearance.

When large areas of puff are required and puckering occurs, then an 80% halftone dot screen may be used as a substitute for the solid area. This will create the same visual effect but will minimize the puckering of the fabric. Generally a coarse mesh (25T to 100mono-poly) provides the best results on most fabrics.